| PC 500R 美國通用電氣公司 物性數據 |
| 規格級別： | --- | 外觀顏色： | --- |
| 用途概述： | --- | ||
| 備注說明： | 特性：玻纖增強10% | ||
| 性能項目 | 試驗條件[狀態] | 測試方法 | 測試數據 | 數據單位 | |||||||||
| 基本性能 | 吸水率 | --- | ASTM D-570 | 0.12 | % | ||||||||
| 物理性能 | 比重 | --- | ASTM D-792 | 1.25 | --- | ||||||||
| 模具收縮率 | 3.2mm | ASTM D-955 | 2-4 | 10-3 | |||||||||
| 增強 | --- | --- | 10 | % | |||||||||
| 阻燃性 | --- | UL 94 | V-0 | --- | |||||||||
| 阻燃性 | --- | UL 94 | 1.5 | mm | |||||||||
| 阻燃性 | --- | UL 94 | 5V | --- | |||||||||
| 阻燃性 | --- | UL 94 | 3.0 | mm | |||||||||
| 損耗因數 | 60Hz | ASTM D-150 | 0.0008 | --- | |||||||||
| 機械性能 | 缺口沖擊強度 | 23°C | ASTM D-256 | 107 | J/m | ||||||||
| 洛氏硬度 | --- | ASTM D-785 | 124 | --- | |||||||||
|
--- |
|
|
|
|||||||||
| 斷裂伸長率 | --- | ASTM D-638 | 15 | % | |||||||||
| 彎曲強度 | --- | ASTM D-790 | 103 | MPa | |||||||||
| 彎曲模量 | --- | ASTM D-790 | 3445 | MPa | |||||||||
| 電氣性能 | 損耗因數 | 1MHz | ASTM D-150 | 0.0075 | --- | ||||||||
| 介電常數 | 60Hz | ASTM D-150 | 3.1 | --- | |||||||||
| 介電常數 | 1MHz | ASTM D-150 | 3.05 | --- | |||||||||
| 體積電阻率 | --- | ASTM D-257 | 1.0×1017 | Ω.cm | |||||||||
| 熱 性 能 | 熱變形溫度 | 0.45MPa | ASTM D-648 | 146 | °C | ||||||||
| 熱變形溫度 | 1.8MPa | ASTM D-648 | 142 | °C | |||||||||
| UL長期使用溫度 | --- | UL 746B | 130 | °C | |||||||||
| 維卡軟化點 | --- | ASTM D-1525 | 154 | °C | |||||||||